What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 03:21

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
Valerie Mahaffey, actress in "Desperate Housewives" and "Northern Exposure," dies at 71 - CBS News
One
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
the problem then depends on "how fast does the fuse operate?".
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Is it wise to choose your family over your honor?
In schematic diagrams this is the symbol for a fuse:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The third is lightning and “how it gets conducted into a home.”
These are simplified answers to the original question, and does not change anything I wrote above.
The other is “what does a “fuse” do?”
It seems Mohan does not understand the difference between a comment and an Answer.
Why are men so attracted to big breasts?
Because the load is inductive, the current lags the voltage.(by a bit).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
He then describes Rainy Season and Lightning.
2024–10–10[John johnson John Johnson ]
nine
Edit 2024–10.
By skipping offseason workouts, Lamar Jackson forfeits another $750,000 - NBC Sports
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
A fuse is a non-resetable over current circuit protector.
[image of Common-mode choke]
He then asserts :
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This one hit behind the barn.
There are two important concepts here.
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
Can you write a short story with a twist ending?
At least they know the answer if they wanted it.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The MOV will conduct when the voltage exceeds 50% of line voltage.
It also is a device that limits the change in current flow.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
a photo is worth a thousand words.
Here is a simplified AC power diagram.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where this question deviates from being a 'generic' question, and becomes more specific.
But… the neutral is now “floating” because of the 1 ohm resistance.
But it can get overloaded, and no longer works.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
These devices are installed between the “hot” and “neutral” and protective ground.
[old diagram got deleted by accident]
What is lightning?
(Dc diagram shown, AC is similar).
He then describes the function of a fuse.
but this device (an Inductor) … impedes the rapid changes in the current.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This device then solves the entire problem.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
I post the exact comment here.
An AC voltage/ current source, and an ac inductive load.
Upvotes:
So, the voltage could go up to 500 volts, and the fuse will not open up.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Now when you have a certain ac resistance, then a current flows in a loop.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is where the MOV conducts again, and dissipated the energy.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is 'the assistant's answer'
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
so, what happens?
One is “what exactly is in a ‘surge protector’ ? ”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
First Sentence:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
What does a fuse do?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
eight
Barnstars:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
There are three different concepts here that are getting confused.
but I think this circuit , shows a few more pieces.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
At one ohm, the resistor has a maximum of 1 watt power.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–14 [Omar Gharbi Omar Gharbi ]